Sharp AL-1651CS ユーザーズマニュアル
SET UP THE SOFTWARE
58
6
Select "Sharp Button
Manager B" in "Send to
this application".
Manager B" in "Send to
this application".
7
Click the "Apply" button.
8
Repeat Steps 5 through 7 to link Button Manager to "SC2:"
through "SC6:".
through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp
Button Manager B" in "Send to this application" and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager B" in "Send to this application" and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menus 1 through 6 can be changed with the
setting window of Button Manager.
For the factory default settings of the scan menu, see "USING THE SCANNER
MODE" (p.61). For the procedures for configuring Button Manager settings, see
"Button Manager Settings" in the Online Manual.
The scan settings for each of scan menus 1 through 6 can be changed with the
setting window of Button Manager.
For the factory default settings of the scan menu, see "USING THE SCANNER
MODE" (p.61). For the procedures for configuring Button Manager settings, see
"Button Manager Settings" in the Online Manual.
If other applications are shown, deselect the checkboxes for the other
applications and leave only the Button Manager checkbox selected.
applications and leave only the Button Manager checkbox selected.
Note