Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Sharp
  4. AL-1651CS
  5. ユーザーズマニュアル

Sharp AL-1651CS ユーザーズマニュアル

ダウンロード
ページ / 116
TROUBLESHOOTING AND MAINTENANCE
76
Paper size for a paper 
tray cannot be set.
Copying or printing is performed.
→ 
→ 
→ 
→ Set the paper size after copying or 
printing is complete.
-
The machine has stopped temporarily 
due to running out of paper or a 
misfeed.
→ 
→ 
→ 
→ Load paper or remove the misfeed, and 
then set the paper size.
23, 80
A copy job stops before 
it is finished.
"MEMORY FULL, PRESS START TO 
RESUME." appears in the display.
→ 
→ 
→ 
→ The memory became full during sort. 
Copy only the originals that have been 
scanned to that point, or cancel the job 
and clear the data from memory.
34
The tray is out of paper.
→ 
→ 
→ 
→ Load paper.
19
The power save 
indicator is lit.
Other indicators are lit.
→ 
→ 
→ 
→ If other indicators are lit, the machine is 
in preheat mode. Press any key on the 
operation panel to resume normal 
operation.
17
Only the power save indicator is lit.
→ 
→ 
→ 
→ If only the power save indicator is lit, the 
machine is in auto power shut-off 
mode. Press the [START] key (
) to 
resume normal operation.
17
Error indicator (
) is 
lit or blinking.
See "DISPLAY MESSAGES" to check 
the meaning of the error indicator and 
error message in the display, and take 
appropriate action.
71
Copies made using the 
RSPF are dirty.
The underside of the RSPF is dirty 
→ Clean the underside of the RSPF 
(especially areas where black lines 
appear).
88
Lighting fixture flickers.
The same power outlet is used for the 
lighting fixture and the machine.
→ 
→ 
→ 
→ Connect the machine to a power outlet 
which is not used for other electric 
appliances.
-
Problem
Cause and solution
Page