Epson 2500 ユーザーズマニュアル

ページ / 11
EPSON Stylus Scan 2500
5 -
 
EPSON Stylus Scan 2500
9/99
Printable Area
A
The minimum top margin is 0.12 inch (3.0 mm). When printing multiple sheets of EPSON Photo Quality Glossy Film, the minimum top margin 
is 1.2 inches (30 mm).
BL
The minimum left margin is 0.12 inch (3.0 mm).
BR The minimum right margin is:
1.10 inches (28 mm) for #10 envelopes
0.28 inch (7.0 mm) for DL envelopes
0.12 inch (3.0 mm) for all other paper sizes.
C
The minimum bottom margin is 0.55 inch (14.0 mm). 
You can extend the minimum bottom margin to 0.12 inch (3.0 mm) by selecting Maximum as the Printable Area setting on the printer driver's 
Paper menu (for Windows) or Page Setup dialog box (for Macintosh). Please note that print quality may decline in the expanded area. Before 
printing large jobs using this setting, print a single sheet to confirm printout quality
.
Note:
Always load paper into the sheet feeder short edge first. Load envelopes flap edge first with the flap side down.
Ink Cartridges
*
The figure given is based upon continuous printing after ink 
replacement. The actual print capacity may vary, depending on 
how often you use the print head cleaning function and how often 
you turn the printer on.
** The ink thaws and is usable after approximately 3 hours at 77 °F 
(25 °C).
Caution:
To ensure good results, use genuine EPSON cartridges and do not 
refill them. Other products may cause damage to your printer not 
covered by EPSON’s warranty.
Do not use an ink cartridge after the expiration date on the package.
Scanning
A
BL
BR
C
A
BR
C
BL
Envelopes
Single sheets (including panoramic size) and index cards
Specification
Black ink cartridge 
(S020189)
Color ink cartridge 
(S020191)
Color(s)
Black
Cyan, magenta, and 
yellow
Print capacity*
900 pages 
(A4, text at 360 dpi)
300 pages (A4, 360 dpi, 
5% duty each color)
Cartridge life
2 years from production date (within 6 months after 
opening package, at 77 °F (25 °C))
Storage 
temperature
–4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Transit 
temperature
–22 to 140 °F (–30 to 60 °C)
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Freezing 
temperature**
3.2 °F (–16 °C)
–0.4 °F (–18 °C)
Dimensions
1.09 (W) 
×
 2.1 (D) 
×
 1.5 (H) 
inches
27.8 (W) 
×
 52.7 (D) 
×
 
38.5 (H) mm
1.7 (W) 
×
 2.1 (D) 
×
 1.5 (H) 
inches
42.9 (W) 
×
 52.7 (D) 
×
 
38.5 (H) mm
Scanner type:
Flatbed color image scanner
Photoelectric 
device:
Color CCD line sensor
Effective pixels:
5100 
×
 7020 pixels at 600 dpi, 100%
Document size:
8.5 
×
 11.7 inches (216 
×
 297 mm) A4 or 
US letter size (The reading area can be 
specified from your software.)
Scanning 
resolution:
600 dpi (main)
2400 dpi (sub)
Output 
resolution:
50 dpi to 9600 dpi (50 to 4800 dpi in 1 dpi 
increments, 7200 dpi and 9600 dpi 
performed with zoom function)
Color separation: RGB color filters on CCD
Zoom:
50 to 200% in 1% increments 
Image data:
12 bits per pixel per color internal
8 bits per pixel per color external
Brightness:
7 levels