Siemens gigaset se551 ユーザーズマニュアル
41
Configuring the local network
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_tcpip.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
Network configuration with Windows 98 SE, ME
To integrate a PC with Windows 98 SE or ME in a local network, you must carry out the
following steps:
1. Set up the PC as the Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 42).
3. Install the TCP/IP protocol (see page 43).
4. Make TCP/IP protocol settings (see page 44).
5. Deactivate the http proxy (see page 48).
6. Configuring the popup blocker (see page 48).
7. Synchronise the TCP/IP settings with the Gigaset SE551 WLAN dsl/cable
following steps:
1. Set up the PC as the Client for Microsoft Networks (see below).
2. Select computer names and workgroup (see page 42).
3. Install the TCP/IP protocol (see page 43).
4. Make TCP/IP protocol settings (see page 44).
5. Deactivate the http proxy (see page 48).
6. Configuring the popup blocker (see page 48).
7. Synchronise the TCP/IP settings with the Gigaset SE551 WLAN dsl/cable
Setting up a PC as the Client for Microsoft Networks
Before the PCs on your network can work together, you have to configure them as a
Microsoft Network Client. This is done as follows:
Microsoft Network Client. This is done as follows:
ì
Click on Start – Settings – Control Panel.
ì
Double click on the Network icon and then open the Configuration tab in the Net-
work window.
work window.
ì
Check whether the list of components contains the entry Client for Microsoft Net-
works.
works.
ì
If it is not there click on Add.