Adam Equipment cbda ユーザーズマニュアル

 

 

 

The [M+] key will add the results of a weighing into memory, regardless of 
whether the local or remote scale is being used for the weighing.   
 

 

•  The values (weight and count) shown on the display can be 

added to the values in the accumulator by pressing the [M+] 
key. The "Weight" display will show the total weight, the 
"Count" display will show the total accumulated count and the 
"Unit Weight" display shows the number of times items have 
been added to the accumulation memory. The values will be 
displayed for 2 seconds before returning to normal. 

 

•  The scale must return to zero or a negative number before 

another sample can be added to the memory.  

 

•  More products can then be added and the [M+] key pressed 

again. This can continue for up to 99 entries or until the capacity 
of the “Weight” display is exceeded. 

 

•  To observe the total value stored, press the [M+] key when the 

scale is at zero. The total will be displayed for 2 seconds. 

 

•  To clear the memory, first press [M+] to recall the total from the 

memory and then press [CE] to clear all values from the 
memory. 

 

 

•  The scale can be set to automatically accumulate total when a 

weight is placed on the scale. This eliminates the need to press 
the [M+] key to store values into the memory.  However the 
[M+] key is still active and can be pressed to store the values 
immediately.  In this case, the values will not be stored when 
the scale returns to zero. 

 

• See PARAMETERS Section on enabling Automatic 

Accumulation. 

 

 

14