Korg toneworks ax3000g ユーザーズマニュアル

 

33

 

This is a pitch shifter with a range of two octaves up or down, rivaling sophisticated 
rack-mounted signal processors.

 

If you assign the PITCH knob to the expression pedal, you can use the 

pedal to control the pitch change. 

 

 

 

 

This filter randomly changes the peak frequency.

 

This is an envelope controlled filter – a filter that opens and closes according to 
the guitar input. By assigning the MANUAL knob to the expression pedal you can 
simulate Korg’s TRAVELER pedal.

 

If you assign the expression pedal to the MANUAL knob, the DEPTH (value 

knob 1) will have no effect.

 

[1] “PITCH”

–24–+24

* Adjusts the pitch in semitone steps.

[2] “FINE”

–50–+50

* Adjusts the pitch in one-cent units.

[3] “TRACKING”10–150 [ms]

Adjusts the tracking of the pitch shifter (i.e., 
how closely it will follow). Shorter settings are 
effective if the PITCH setting is close to 0, 
and longer settings are effective if the PITCH 
setting is close to +/–24. While listening to 
the pitch-shifted sound, adjust this so that 
playing is easier.

[4] “DIRECT”

0.0–10.0

* Adjusts the level of the direct sound.

[5] “EFFECT”

0.0–10.0

* Adjusts the level of the effect.

[1] “DEPTH”

0.0–10.0

* Adjusts the modulation depth.

[2] “SPEED”

0.1–10.0[Hz]

* Adjusts the modulation speed.

[3] “MANUAL”

1.0–10.0

* Adjusts the center frequency.

[4]  “RESO”

0.0–10.0

* Adjusts the amount of resonance.

[5] “MIX”

0.0–10.0

* Adjusts the mix level of the effect.

[1] “DEPTH”

0.0–10.0

* Adjusts the depth of the effect.

[2] “ATTACK”

1.0–10.0

* Adjusts the speed of response.

[3] “MANUAL”

1.0–10.0

* Sets the cutoff frequency. If DEPTH is set to 

10, MANUAL will not function.

[4] “RESO”

0.0–10.0

* Adjusts the amount of resonance.

[5] “SENS/POL” 0u–10u, 0d–10d * Adjusts the sensitivity of response to the gui-

tar volume.