Korg toneworks ax3000g ユーザーズマニュアル

43

You can make the following control switch settings independently for each program.
Press the EXP/CTL button and use value knob 5 to select the effect you want to 
control.

NOTE: The CONTROL switch LEDs indicate the on/off status.

NOTE: The CONTROL switch LED will blink at the tempo you specify.

NOTE: The maximum tap interval is 10 seconds.

NOTE: If you haven’t selected an applicable effect, nothing will be controlled.

NOTE: ESS TAP1, ESS TAP2, and ESS TRIG will do nothing if the SPEED of the 
step effect is set to PEdL.

• “I/ON OFF”

External effect insertion on/off

• “P/ON OFF”

Pre-effect on/off

• “A/ON OFF”

Drive/Amp model on/off

• “M/ON OFF”

Modulation effect on/off

• “D/ON OFF”

Delay effect on/off

• “R/ON OFF”

Reverb effect on/off

• “MOD TAP”

Use TAP TEMPO to set the SPEED parameter of the 
modulation effect

• “DLY TAP”

Use TAP TEMPO to set the TIME parameter of the delay 
effect

• “FLN TRIG”

LFO START TRIGGER of the CLASSIC FLANGER effect

• “ROT SPD”

SPEED SW of the ROTARY effect

• “HOLD DLY”

HOLD of the HOLD DELAY effect

• “FREEZ”

ON of the FREEZ effect

• “ESS CTL1”

Turn ESS on/off

• “ESS CTL2”

Turn the effect being controlled by ESS on/off

• “ESS TAP1”

Use tap tempo to specify the duration until the next step

• “ESS TAP2”

Use tap tempo to specify the length from step 1 until the 
last step  (if in Alternate mode, the length of one cycle 
back to step 1)

• “ESS TRIG”

The sequence will begin from step 1