Korg toneworks ax3000g ユーザーズマニュアル
43
Introduction
Panel Tour
Setup
Playing
Creating
and Storing
Effect Type
Pedals
ESS
Index
MIDI/DIGITAL
Factory
settings
Trouble-
shooting
Spec.
Tuner
Appendix
C
ONTROL
SWITCH
SETTINGS
You can make the following control switch settings independently for each program.
Press the EXP/CTL button and use value knob 5 to select the effect you want to
control.
Press the EXP/CTL button and use value knob 5 to select the effect you want to
control.
S
WITCHING
EACH
EFFECT
ON
/
OFF
NOTE: The CONTROL switch LEDs indicate the on/off status.
U
SING
TAP TEMPO
TO
SET
A
PARAMETER
NOTE: The CONTROL switch LED will blink at the tempo you specify.
NOTE: The maximum tap interval is 10 seconds.
E
FFECT
CONTROL
NOTE: If you haven’t selected an applicable effect, nothing will be controlled.
C
ONTROLLING
ESS
NOTE: ESS TAP1, ESS TAP2, and ESS TRIG will do nothing if the SPEED of the
step effect is set to PEdL.
step effect is set to PEdL.
• “I/ON OFF”
External effect insertion on/off
• “P/ON OFF”
Pre-effect on/off
• “A/ON OFF”
Drive/Amp model on/off
• “M/ON OFF”
Modulation effect on/off
• “D/ON OFF”
Delay effect on/off
• “R/ON OFF”
Reverb effect on/off
• “MOD TAP”
Use TAP TEMPO to set the SPEED parameter of the
modulation effect
modulation effect
• “DLY TAP”
Use TAP TEMPO to set the TIME parameter of the delay
effect
effect
• “FLN TRIG”
LFO START TRIGGER of the CLASSIC FLANGER effect
• “ROT SPD”
SPEED SW of the ROTARY effect
• “HOLD DLY”
HOLD of the HOLD DELAY effect
• “FREEZ”
ON of the FREEZ effect
• “ESS CTL1”
Turn ESS on/off
• “ESS CTL2”
Turn the effect being controlled by ESS on/off
• “ESS TAP1”
Use tap tempo to specify the duration until the next step
• “ESS TAP2”
Use tap tempo to specify the length from step 1 until the
last step (if in Alternate mode, the length of one cycle
back to step 1)
last step (if in Alternate mode, the length of one cycle
back to step 1)
• “ESS TRIG”
The sequence will begin from step 1