Sharp dv-rw2u ユーザーズマニュアル

Basic Conneciton

Using Other Types of Video Output

In order to view clearer DVD images, it is recommended that you use a commer-
cially available S-Video or component video cable when connecting your TV to the
video output.

Connecting Using
an S-Video Output

Connect the S-VIDEO output

jack on this recorder to the S-

VIDEO input jack on your TV

using a S-VIDEO cable (Com-

mercially available).

Important!

• When using this connection, set

“PROGRESSIVE” in “PLAYBACK
SETUP” to “OFF”. (When the
setting is “ON”, the disc playback
picture cannot be viewed.)

After the Connection
Plug in the power cords of the TV. Then
go to “EZ Set Up” (see page 23).

Connecting Using
the Component
Video Output

Connect the COMPONENT OUT

jacks on this recorder to the

COMPONENT input jacks on

your TV using a Component

Video cable (Commercially

available).

Important!

• If your TV is compatible with

progressive-scan component
video, set “PROGRESSIVE” in
“PLAYBACK SETUP” to “ON”. If
your TV is not compatible with
progressive-scan video, set to
“OFF”.

After the Connection
Plug in the power cords of the TV. Then
go to “EZ Set Up” (see page 23).

The Recorder

To COMPONENT

input jacks

To COMPONENT

OUT jacks

The Recorder

To S-VIDEO

input jack

To S-VIDEO

output jack

S-VIDEO cable
(Commercially
available)

Component
Video cable
(Commercally
available)

COMPONENT

OUT

(480I/480P)

IN FROM

ANTENNA

VHF/UHF/CATV

OUT TO TV

DIGITAL OUT

OPTICAL

IN 1

AUTO

REC

IN 3

OUT

R-AUDIO-L

VIDEO

S-VIDEO

LINE