Sharp AR-5316 ユーザーズマニュアル
18
2
Chapter 2
COPY FUNCTIONS
This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure adjustment.
NORMAL COPYING
This section explains how to make a regular copy.
If "Auditing mode" has been enabled (p.39), enter your 3-digit account number.
If "Auditing mode" has been enabled (p.39), enter your 3-digit account number.
Copying from the document glass
1
Open the document cover/SPF, and
place the original.
place the original.
Place the original face
down on the document
glass. Align it with the
original size scale.
down on the document
glass. Align it with the
original size scale.
2
Close the document cover/SPF.
3
Press the [ORIGINAL SIZE ENTER]
key and select the original size.
key and select the original size.
● Make sure that the PAPER SIZE indicator lights up.
If the indicator is not lit, no tray has the same size of
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key (
paper as the original. Load paper of the required size
in a tray, or select the bypass tray with the [TRAY
SELECT] key (
) and copy from the bypass tray.
● The bypass tray must be manually selected.
● To copy on paper of a different size than the original,
select the paper with the [TRAY SELECT] key (
).
● If the ORIGINAL SIZE indicator is blinking, rotate the
original so that it is in the same orientation as the
blinking ORIGINAL SIZE indicator.
blinking ORIGINAL SIZE indicator.
4
Set the number of copies.
5
Press the [START] key (
) to begin
copying.
The copy is delivered to
the paper output tray.
the paper output tray.
An original up to 11" x 17" can be placed on
the document glass.
the document glass.
Note
• The paper output tray can hold up to 250
sheets of paper.
• About one minute after copying ends, "Auto
clear" activates and restores the copy
settings to the initial settings. (p.12) The
setting for "Auto clear time" can be changed
in the user programs. (p.33)
settings to the initial settings. (p.12) The
setting for "Auto clear time" can be changed
in the user programs. (p.33)
• Press the [CLEAR] key (
) to stop
copying in the middle of a run.
ORIGINAL SIZE
ENTER
GINAL
PAPER
SIZE
11
X
17
8½
X
14
8½
X
11
8½
X
11
8½
X
5½
EXTRA
START
Note
AR-5316-5320-EX.book 18 ページ ２００５年４月８日 金曜日 午前９時３５分