Sharp R-520LW ユーザーズマニュアル

ページ / 24
18
C L E A N I N G   A N D   C A R E
Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning.
Exterior
The outside surface is painted. Clean the outside with 
mild soap and water. Then wipe with a clean dampened 
cloth and polish dry with a soft cloth. Do not use any 
type of household or abrasive cleaner.
Door
Wipe the window on both sides with a soft damp cloth to 
remove any spills or spatters. Metal parts will be easier 
to maintain if wiped frequently with a soft damp cloth. 
Cleaners which are marked specifi cally for use with 
stainless steel may be used for stainless steel models. 
Follow package directions exactly. Avoid the use of any 
harsh cleaners or one not marked for stainless steel use 
as they may stain, streak or dull the door surface.
Touch Control Panel
Wipe the panel with a soft cloth dampened slightly with 
water only. Dry with a soft cloth. Do not scrub or use 
any sort of chemical cleaners. Close door and touch 
STOP/CLEAR.
Interior
Cleaning is easy because little heat is generated to the 
interior surfaces; therefore, there is no baking and setting 
of spills or spattering. To clean the interior surfaces, 
wipe with a soft damp cloth. DO NOT USE ABRASIVE 
OR HARSH CLEANERS OR SCOURING PADS. For 
heavier soil, use baking soda or a mild soap; wipe 
clean with a soft damp cloth. 
NEVER SPRAY OVEN 
CLEANERS  DIRECTLY ONTO ANY PART OF 
THE OVEN.
Waveguide Cover
The waveguide cover is made from mica so it requires 
special care. Keep the waveguide cover clean to assure 
good oven performance. Carefully wipe with a soft damp 
cloth any food spatters from the surface of the cover 
immediately after they occur. Built-up splashes may 
overheat and cause smoke or possibly catch fi re.  Do 
not remove the waveguide cover. 
Odor Removal
Occasionally, a cooking odor may remain in the oven. 
To remove, combine 1 cup water, grated peel and juice 
of 1 lemon and several whole cloves in a 2-cup glass 
microwave-safe measuring cup. Boil for several minutes 
using 100% power. Allow to set in oven until cool. Wipe 
interior with a soft cloth.
Turntable / Turntable Support
The turntable and turntable support can be removed 
for easy cleaning. Wash them in mild, sudsy water; for 
stubborn stains use a mild cleanser and non abrasive 
scouring sponge. They are also dishwasher-safe. Use 
upper rack of dishwasher. The turntable motor shaft is 
not sealed, so excess water or spills should be wiped 
up immediately.