Tascam cd-500-500b ユーザーズマニュアル

Always use the most recent firmware for this device. 

Please visit the TASCAM web site at http://tascam.com/ to 

check for the latest firmware.  

When the fade out time was set, it did not function 

properly when the 

 (pause) [JOG] button on the 

unit or the 

 PAUSE button on the remote control was 

pushed. This has been fixed.
If the resume and power on play functions were ON, 

the resume function did not work when the power was 

turned ON. This has been fixed.
When playing back tracks with the flash start function, 

playback could become unstable depending on the 

condition of the audio CD. This has been fixed.

The precision of playback time display has been 

improved for MP3/WAV files (32/48 kHz). 
If you pressed the 

CALL button in program mode to 

start playback from a paused state, playback started 

from the first track in the saved program. This has been 

changed so that now playback starts from the pause 

point.
Pressing the 

SKIP 

 button when stopped in 

program mode started playback from the first track 

in the saved program. This has been changed so that 

now playback starts from the final track in the saved 

program.

Confirm the firmware version of your CD-500/500B before 

conducting a firmware update.
1  Turn the unit’s power ON.
2  Enter menu mode, and select the 

21 INFO

Version

Build number

If the firmware version shown here is the same or 

newer than the firmware version that you planned to 

update to, then there is no need to update it.

Prepare a completely blank CD-R or CD-RW and a 

computer that can create a data CD.

Be very careful not to cut the power to the unit during 

firmware updating. If the power should be interrupted 

during firmware updating, the unit could become 

unstartable or otherwise damaged.
1  Download the file

Download the latest firmware from the TASCAM 

website (http://tascam.com/). Uncompress the 

downloaded file if it is in a ZIP format or otherwise 

compressed.

Write the downloaded firmware files to the disc. 

(V1.11, for example,  uses 8 firmware files: C5B00111.

upd, C5C00111.upd, C5D00111.upd, C5M00111.

upd, C5R00111.upd, C5R10111.upd, C5S00111.upd 

and C5S10111.upd.) Use ISO 9660 Level 1 (MS-DOS-

compatible) Disc At Once format to write the CD-R or 

CD-RW. 

1)  Turn the unit’s power on. 
2)  Confirm that 

no disc

 appears on the display. 

While pressing and holding both the SEARCH 

 

[A.CUE] and SEARCH 

 [A.READY] buttons on 

the unit, press the EJECT button.

3)  Confirm that 

UPDATE IN

 appears on the 

display, and insert the update data CD. 

D01153220B