Siemens siemens network router mc35 ユーザーズマニュアル
Remote-SAT User's Guide
MC35_SAT_01_v02.00
Page 12 of 65
11.01.2002
1.1.6.2 Remote-SAT State Transition Table
The following table outlines which AT commands can be issued during certain states. However, the
test and read AT commands are available at any time. So it is possible to determine the current state
of the interface via AT^SSTA?.
If a response contains text, the selected alphabet has to be used.
test and read AT commands are available at any time. So it is possible to determine the current state
of the interface via AT^SSTA?.
If a response contains text, the selected alphabet has to be used.
Meaning of options in column “M/O/X”:
M: The TA has to issue the AT command to get Remote-SAT service (mandatory).
O: Issue of the AT command is optional.
X: Issue of the AT command is not allowed at this time and will lead to an error message.
M: The TA has to issue the AT command to get Remote-SAT service (mandatory).
O: Issue of the AT command is optional.
X: Issue of the AT command is not allowed at this time and will lead to an error message.
State
AT command
State after power on the ME and no notification given by the SIM that an application is
available. No write version of an AT command is allowed.
State is entered after SIM removal again.
available. No write version of an AT command is allowed.
State is entered after SIM removal again.
Action M/O/X
Description
^SSTA=1,n
X
^SSTGI=<pac>
X
^SSTR=<pac>
X
RESET
(0)
^SSTR=<event>
X
SIM has released its application.
SAT service is available, but Remote-SAT interface needs to be activated by the TA.
SAT service is available, but Remote-SAT interface needs to be activated by the TA.
Action M/O/X Description
^SSTA=1,n
M
Enable SAT service, so that all SAT notifications may be
issued as URCs (^SSTN:<cmdType>).
issued as URCs (^SSTN:<cmdType>).
^SSTGI=<pac>
X
^SSTR=<pac>
X
OFF
(1)
^SSTR=<event>
X
SIM application is running, but no proactive command has been issued.
Action
Action
M/O/X Description
^SSTA=1,n
O
Use to switch to alphabet type <n>
^SSTGI=<pac>
X
^SSTR=<pac>
X
IDLE
(2)
^SSTR=<event>
O
Response to indicate TA, i.e. user activity.
SIM application has issued a proactive command. This event is signaled to the TA via
^SSTN:<cmdType>.
Action
^SSTN:<cmdType>.
Action
M/O/X Description
^SSTA=1,n
O
Use to switch to alphabet type <n>
^SSTGI=<pac>
M
Get information related to an issued notification
^SSTN:<cmdType>. This is requested before a response can
be issued via ^SSTR=<pac>.
^SSTN:<cmdType>. This is requested before a response can
be issued via ^SSTR=<pac>.
^SSTR=<pac>
X
PAC
(3)
^SSTR=<event>
X
SIM application is waiting for the response to the ongoing proactive command.
Action
Action
M/O/X Description
^SSTA=1,n
O
Use to switch to alphabet type <n>
^SSTGI=<pac>
X
^SSTR=<pac>
M
Issue Terminal Response related to the ongoing proactive
command.
command.
WAIT
(4)
^SSTR=<event>
X