Shark gi468n 10 ユーザーズマニュアル

Read all garment care labels before you start 
ironing. You can also test the temperature of the 
iron on a hem or an inside seam. 

Iron similar fabrics together and in sequence of 
synthetic fibers acrylic, nylon, silk/wool, polyester 
and cotton/linen. This will reduce the need to 
adjust the temperature frequently.

First things first, remove any 
labels, stickers or tags that may 
be attached to your Shark

®

 

Rapido™ Electronic Iron.

  Open the water inlet cover 

  located on the front of the iron.

  Holding the iron at a slight 

  angle; fill the tank with the 
  filling flask without going over 
  the “MAX” line.  Close the water 
  inlet cover.

  Plug in the iron.

 Choose dry or steam ironing 

  based on the type of fabric you 
  are going to iron.
  For DRY ironing set the steam 
  control dial to “0”.

  For STEAM ironing set to desired 
  steam for the type of material to be 
  ironed.

  Set the desired fabric/temperature by 

  pressing the Electronic Temperature 
  Control on the top of the handle.

  The temperature indicator light on the 

  LED Display Panel will flash as the    
iron reaches the preset temperature.

  Allow approximately 2 minutes for the 

  iron to heat up or cool down to the 
  new temperature setting. Start ironing! 

 

Quick 

S

tart

  Use the atomizer spray to get rid of 

 

tough wrinkles. Make sure there is 

 

enough water in the tank. Press the 

 

atomizer spray button to moisten 

 

the fabric.

 

Before choosing to iron with steam 

 

for the first time, let the iron heat-up, 

 

hold in a horizontal position and hit 

 

the burst of steam button a couple of 

 

times.

 

When you turn on the 

 

iron for the first time it 

 

might emit an odor for 

 

the first ten minutes. This 

 

is because the materials 

 

used in making  the iron 

 

are heating up. The odor 

 

is safe and should not 

 

re-occur after the initial 

 

heating. 

 

To prevent fire, do not 

 

leave iron unattended 

 

while connected.

 1-800-798-7398