Sharp VL-WD250U ユーザーズマニュアル

This camcorder allows you to select between
the 12-bit and 16-bit audio recording modes.
The camcorder normally records audio in the
12-bit audio recording mode. For higher-quality
audio recording, select the 16-bit audio
recording mode.

Audio recording
mode indicator

Set the camcorder to CAMERA mode.

Press the MENU/DISPLAY button until
the menu screen appears.

Select 

U

, then press 

r

 on the Opera-

tion button. Select “AUDIO MODE” (

1

),

then press 

r

 (

2

).

Press 

d

 or 

y

 to select “16bit”, then

press 

e

.

Press the MENU/DISPLAY button to
turn off the menu screen.

• The audio recording mode indicator

changes from “12bit” to “16bit”.

Select “12bit” in step 4 above.

The digital image stabilization (DIS) function is
factory preset to on to stabilize the image by
electronically compensating for relatively minor
image shaking that is often annoying in close-
up shots.

• The DIS function cannot compensate for

excessive image shaking.

When image shaking does not occur (e.g.
when using the camcorder on a tripod), turn off
the DIS function. The picture will appear more
natural when the DIS function is off.

In Recording Standby mode, set the DIS switch
to OFF.
• The z indicator is turned off.

• When using Audio Dubbing with 16-bit audio

recordings, both the dubbed and original
sounds will be recorded in mono (see page 59).

DIS indicator

Set the DIS switch to ON.

DIS switch