Electrolux ewt904 ユーザーズマニュアル

You must DISCONNECT the appliance 
from the electricity supply, before you 
can carry out any cleaning or 
maintenance work.

The dispenser needs to be cleaned 
regularly, preferably after each wash. 
Inspect the dispenser after each wash to 
see if there is any residue of detergent.

To do this proceed as follows:

Rotate Selector knob to “O” position.

Switch off the electricity at the power 
point.

Leave lid open for a while. This allows 
time for moisture inside the washing 
machine to evaporate and for any 
odours to disperse.

Pull the dispenser drawer forward 
until it stops.

Remove the filter column from the 
centre of the agitator.

Before replacing the dispenser back 
in its recess, clean the inside of the 
drawer with an old toothbrush.

Put the dispenser back into its 
runners and close the drawer.

Lift the front of the drawer up and 
forward to remove it from the runners.

Clean the dispenser drawer with hot 
water and a brush, eg. an old 
toothbrush.
Dry the drawer.

Turn off the water taps.

Lint is a collection of threads and fluff 
which comes off your clothes during 
washing. 
Your washing machine collects this lint 
in the lint filter. It is important to clean 
out this lint filter, preferably after each 
wash.

How to clean the lint filter :

22