Electrolux ewt113 ユーザーズマニュアル

ページ / 31
Detergents and Additives
Quantity Of Detergent To Be 
Used
Ink: depending on the type of ink, 
moisten the fabric first with acetone (*), 
then with acetic acid; treat any residual 
marks on white fabrics with bleach and 
then rinse thoroughly.
Tar stains: first treat with stain remover, 
methylated spirits or benzine, then rub 
with detergent paste. 
(*) do not use acetone on artificial silk.
Good washing results also depend on 
the choice of detergent and use of the 
correct quantities to avoid waste and 
protect the environment. 
Although biodegradable, detergents 
contain substances which, in large 
quantities, can upset the delicate 
balance of nature.
The choice of detergent will depend on 
the type of fabric (delicates, woollens, 
cottons, etc.), the colour, washing 
temperature and degree of soiling.
The type and quantity of detergent will 
depend on the type of fabric, load size, 
degree of soiling and hardness of the 
water used.
Information on hardness of the water in 
your area can be obtained from the 
relevant water supply company, or from 
your local authority.
Follow the product manufacturers’ 
instructions on quantities to use.
Water hardness is classified in so-called 
“degrees” of hardness.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form during 
washing
20