Sharp Inside Pro ユーザーズマニュアル

INSTALLATION MANUAL

IMPORTANT SAFETY INSTRUCTIONS

If the information in this manual is not followed

exactly, a ﬁ re or electrical shock may result that could cause

property damage, personal injury or death.

UNPACKING YOUR MICROWAVE DRAWER

• Remove all packing

materials from inside

the Microwave Drawer.

DO NOT REMOVE

THE WAVEGUIDE

COVER, which is

located on the top of the

Microwave Drawer.

• Remove the feature

sticker, if there is one.

Check the drawer for

any damage, such as

misaligned or bent

d r awe r, d a m a ge d

drawer seals and sealing surfaces, broken or loose Microwave

Drawer guides and dents inside the cavity or on the front

side of the drawer. If there is any damage, do not operate

the Microwave Drawer and contact your dealer or a SHARP

AUTHORIZED SERVICER.

IMPORTANT NOTES TO THE INSTALLER

• Read all of the Installation Manual before installing the

Microwave Drawer.

• Remove all packing material before connecting the electrical

supply.

• Observe all governing codes and ordinances.
• Be sure to leave these instructions with the consumer.

IMPORTANT NOTES TO THE CONSUMER

Keep this manual with your Operation Manual for future

reference.
• As when using any microwave oven generating heat, there are

certain safety precautions you should follow. These are listed

in the Operation Manual. Read all and follow carefully.

• Be sure your Microwave Drawer is installed and grounded

properly by a qualiﬁ ed installer or service technician.

Waveguide

Cover

Sealing

Surface

Oven

Cavity

Sealing

Surface

To reduce the risk of tipping, the Microwave

Drawer must be secured by a properly installed Anti-Tip

block.
• This Microwave Drawer must be electrically grounded in

accordance with local codes.

• Make sure the wall coverings and the cabinets around the

Microwave Drawer can withstand the heat generated by the

Microwave Drawer.

Never leave children alone or unattended in

the area where a Microwave Drawer is in use. Never leave the

drawer open when the microwave is unattended.

Stepping, leaning or sitting on the drawer

may result in serious injuries and can also cause damage to the

Microwave Drawer.
• Do not use the Microwave Drawer as a storage space.

This creates a potentially hazardous situation.

• Check that the time-of-day is in the display. If not, touch

Stop/Clear to prevent unintended use.

CLEARANCES AND DIMENSIONS

• Dimensions that are shown in Figures 1 and 2 must be used.

Given dimensions provide minimum clearance. Locate

electrical outlet in the shaded area in the upper left-hand

corner of the cutout.

• Contact surface must be solid and level. Pay special attention

to the ﬂ oor on which the Microwave Drawer will sit. The

ﬂ oor of the opening should be constructed of plywood

strong enough to support the weight of the oven (about 100

pounds).

• Check location where the Microwave Drawer will be

installed for proper electrical supply.

• Your oven can be built into a cabinet or wall by itself or

under a speciﬁ c electric wall oven listed below.

Electrolux

E30EW75DSS1

Kitchen Aid

KEBC107KBLO

Frigidaire

PLEB30S8CCC

Viking

DES0100

Wolf

S030F/S

• Be sure that the clearance of the ﬂ oor between the wall oven

and the microwave drawer is a minimum of 2-inches.

• For updates of approved appliances that can be used adjacent

to the Microwave Drawer go to www.sharpusa.com.

• The microwave interior will easily accommodate a 9” x 13”

oblong dish or a bag of microwave popcorn.