Sharp aquos lc-46d78un ユーザーズマニュアル
12
Turning On/Off the Power
Press POWER on the TV or on the remote control unit to turn the
power on.
power on.
• POWER indicator (Green): The TV is on.
• The Initial Installation starts when the TV powers on for the fi rst time. If the
TV has been turned on before, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, perform "EZ setup" on the Setup
menu on page 20.
changing the settings of the Initial Installation, perform "EZ setup" on the Setup
menu on page 20.
Press POWER on the TV or on the remote control unit again to turn the
power off.
power off.
• The TV enters standby and the image on the screen disappears.
• The POWER indicator on the TV turns off.
• The POWER indicator on the TV turns off.
• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
Watching TV
Initial Installation
When you turn on the TV for the fi rst time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
• ENERGY STAR qualifi cation is based on AV MODE
"STANDARD".
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
3
Press
c/d to select "Air" or "Cable".
Press
ENTER to enter the setting.
POWER
(On/Standby)
(On/Standby)
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
Channel auto search makes the TV look for all channels
viewable in the set area.
4
When "Air" is selected in Antenna setting:
Press
c/d to select "Start", and then press ENTER.
When "Cable" is selected in Antenna setting:
Press
a/b to select "Analog & Digital Search Start"
to search both analog and digital broadcasts, or to
select “Analog Search Start” to search only analog
broadcasts, and then press ENTER.
select “Analog Search Start” to search only analog
broadcasts, and then press ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
• If no channel is found, confi rm the type of connection made
with your TV and try "EZ Setup" again.
(See page 20.)
• For changing the settings of the Initial Installation, perform
• For changing the settings of the Initial Installation, perform
"EZ setup" on the Setup menu on page 20.
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
Select from among 3 languages: English, French and Spanish.
1
Press
a/b to select the desired language listed on
the screen, and then press ENTER.
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifi es for ENERGY STAR in
Home mode default setting.
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifi es for ENERGY STAR in
Home mode default setting.
2
Press
c/d to select "Home" or "Store".
Press
ENTER to enter the setting.
Home: “Power Saving” is set to "Advanced", and AV
MODE is set to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can
be set.
be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings are
completed, the Feature Demo screen is displayed if there is
no operation for several minutes.
no operation for several minutes.
Language
TV Location
Air/Cable
CH Search
English
Español
Français
Analog & Digital Search Start
Cancel
Analog Search Start
Air
Cable
Start
Cancel
Home
Store
Select
POWER
LC-46D78UN_E.indb 12
LC-46D78UN_E.indb 12
2010/02/25 17:47:05
2010/02/25 17:47:05