Sharp aquos lc-46d78un ユーザーズマニュアル
19
On-Screen Display Menu
Digital Noise Reduction
Produces a clearer video image.
Auto: Automatically adjusts the level of noise reduction.
High/Middle/Low: Select a desired level for viewing a
High/Middle/Low: Select a desired level for viewing a
clearer video image.
Off: No adjustment.
"Digital Noise Reduction" is not available during PC format
input.
input.
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Standard: Normal adjustment.
Fast: For moving images.
"3D-Y/C" is available for input signal from Composite Video
and analog broadcasts (air and cable).
and analog broadcasts (air and cable).
Monochrome
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
Off: Normal color.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
Min.: –16 through +15
The "Range of OPC" settings are active only when "OPC" is
set to "On".
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
set to "On".
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting.
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Audio Menu
You can adjust the sound quality to your preference
with the following settings.
with the following settings.
Selected item
cbutton
dbutton
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
the right speaker
Decrease audio from
the left speaker
the left speaker
Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 24.)
For resetting all Audio adjustment items to the factory
preset values, press
"Variable". (See page 24.)
For resetting all Audio adjustment items to the factory
preset values, press
a/b to select "Reset", press ENTER,
press
c/d to select "Yes", and then press ENTER.
•
•
•
•
•
•
•
•
Surround
The surround function produces Surround effect from
the speakers.
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 24.)
For some discs, setup may be required on your DVD player.
In this case, please refer to the operation manual of your
DVD player.
"Variable". (See page 24.)
For some discs, setup may be required on your DVD player.
In this case, please refer to the operation manual of your
DVD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.
On: Bass Enhancer function is on.
Off: Normal sound.
Off: Normal sound.
Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 24.)
"Variable". (See page 24.)
Power Control Menu
Power control setting allows you to save energy.
Power Saving
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan.
in order to decrease the power consumption and
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video
content. When set to "Standard", "
" appears on the screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
"
"
" appears on the screen.
Off: This function does not work.
"Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
to "AUTO" or "DYNAMIC (Fixed)".
You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
change to "Advanced".
change to "Advanced".
—When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture menu screen.
the Power Saving leaf icon appears to the left of "OPC" in
the Picture menu screen.
No Signal Off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
down if there is no signal for 15 minutes.
When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.
When a TV program fi nishes, this function may not operate.
remaining time will start to keep appearing every minute.
"Disable" is the factory preset value.
When a TV program fi nishes, this function may not operate.
•
•
•
•
•
•
•
•
•
•
LC-46D78UN_E.indb 19
LC-46D78UN_E.indb 19
2010/02/25 17:47:10
2010/02/25 17:47:10