Tascam RC-F82 ユーザーズマニュアル

l

These are balanced XLR analog input connectors  

(1: GND, 2: HOT, 3: COLD). Connect them with the 

HS-P82 LINE OUT connectors. 

;

These are balanced XLR analog output connectors  

(1: GND, 2: HOT, 3: COLD). The signals input through 

the LINE IN connectors (left and right) are passed 

through and output from these. 

z

These are balanced XLR (left and right) analog output 

connectors (1: GND, 2: HOT, 3: COLD). When the TO 

LINE OUT 2 switch is set to OFF, the signal input 

through the LINE IN connectors are passed through 

and output from these. When the TO LINE OUT 2 

switch is set to ON, the talkback signal is output from 

these connectors. 

x

These are balanced XLR analog input connectors  

(1: GND, 2: HOT, 3: COLD). Use these connectors for the 

input of talkback signals. The signals input through 

these connectors are mixed in the analog domain with 

the signal input through the PHONES IN jack and then 

the mix is output through the PHONES jack. 

c

This standard stereo phone jack is an analog input 

connector. Connect it to the PHONES jack of the 

HS-P82 unit. The signal input through this connector 

is mixed in the analog domain with the signals input 

through the RETURN IN connectors and then the mix 

is output through the PHONES jack.

v

Use this standard stereo phone jack to connect 

headphones. Use the PHONES knob on the top panel 

to adjust the headphones output level. 

Before connecting headphones, turn the PHONES knob 

to the minimum volume. Failure to do so could cause 

sudden loud noises to occur, which might damage your 

hearing or equipment.