Allied Telesis at-gs950-16 ユーザーズマニュアル
How to Start an AT-GS950/16 WEB Management Session
26
User Interface Configuration
This procedure explains how to enable and disable the user interfaces on
the switch. With this procedure you can enable or disable the AT-GS950/
16 SNMP Agent. For more information about SNMP, see the AT-GS950
Web User Guide.
the switch. With this procedure you can enable or disable the AT-GS950/
16 SNMP Agent. For more information about SNMP, see the AT-GS950
Web User Guide.
The Web Server Status is displayed as Enabled for your information
only. The Web Server cannot be disabled.
only. The Web Server cannot be disabled.
SNMP Interface
To enable or disable the AT-GS950/16 SNMP interface, perform the
following procedure:
following procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
The System folder expands.
2. From the System folder, select User Interface.
The User Interface Page is displayed. See Figure 12.
Figure 12. User Interface Page
3. Choose Enable or Disable from the pull down list for the SNMP Agent
parameter.
Enabled - When you enable this parameter, the SNMP agent is
active. You can manage the AT-GS950/16 switch with Network
Management Software and the switch’s private MIB.
active. You can manage the AT-GS950/16 switch with Network
Management Software and the switch’s private MIB.
Disabled - When you enable this parameter, the SNMP agent is
inactive.
inactive.
Note
For more information about SNMP, see the AT-GS950 Web User
Guide.
Guide.
4. Click Apply located under the Web Server Status Enable/Disable
field.