Alliance Laundry Systems Clothes Dryer ユーザーズマニュアル
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
21
512686
After either dryer has operated for approximately five
minutes, observe burner flame through lower front
panel. Adjust the air shutter to obtain a soft, uniform
blue flame. (A lazy, yellow-tipped flame indicates lack
of air. A harsh, roaring, very blue flame indicates too
much air.) Adjust the air shutter as follows:
1. Loosen the air shutter lockscrew.
2. Turn the air shutter to the left to get a luminous
2. Turn the air shutter to the left to get a luminous
yellow-tipped flame, then turn it back slowly to
the right to obtain a steady, soft blue flame.
3. After the air shutter is adjusted for proper flame,
tighten the air shutter lockscrew securely.
4. Reinstall the lower front panel.
After either dryer has operated for approximately three
minutes, exhaust air or exhaust pipe should be warm.
Figure 23
For personal safety, lower front panel must
be in place during normal operation.
W046
WARNING
D700I
DRY2235N
1
Closed Position
5
3.1 mm (1/8 in.) Pipe Plug
2
Shut-Off Valve Handle
(For checking manifold pressure)
3
Air Shutter Lockscrew
6
Open Position
4
Air Shutter
1
4
3
6
2
5
COIN SLIDE, MDC, AND NETMASTER MODELS THROUGH
SERIAL NO. 0803 AND NONMETERED MODELS
1
4
3
6
2
5
COIN SLIDE, MDC, AND NETMASTER MODELS
STARTING SERIAL NO. 0804