Sharp CP-ES770 ユーザーズマニュアル
15
04/12/21
CD-ES770(U)2.fm
TINSEA095AWZZ
Basic Operation
CD-ES770
Setting the clock
In this example, the clock is set for the 12-hour (AM 12:00) display.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the
time. The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
The "CLOCK" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" is not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.
Perform "Setting the clock" from step 1. If the "CLOCK" is not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.
To change the 12-hour or 24-hour display:
Note:
The clock can also be set with the remote control.
The clock can also be set with the remote control.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press
the
or
button to
select "CLOCK", and press the MEMORY/SET button.
4
Press the
or
button to select 12-hour or 24-hour
display and then press the MEMORY/SET button.
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
"AM 0:00"
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
5
Press
the
or
button to adjust the hour and then
press the MEMORY/SET button.
Press
the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6
Press
the
or
button to adjust the minutes and
then press the MEMORY/SET button.
Press
the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 33 for details.]
memory (reset)" on page 33 for details.]
2
Perform "Setting the clock" from step 1.
3