Sanyo xacti vpc-ca9gx ユーザーズマニュアル

English

k Storing and maintaining your camera

i Do not leave the camera unwashed after it has been 

immersed in salt water or if salt water is adhering to 
it. Doing so may cause corrosion and discoloration of 
the plating, as well as deterioration of the camera’s 
waterproof capability.

i After the camera has been used in water, use fresh 

water to wash it. Never use soap or detergent to 
clean the camera, as doing so will cause deterioration 
of the camera’s waterproof capability.

i After washing the camera, take care to completely 

drain it, and use a dry cloth to wipe off any drops of 
water adhering to it (page 67).

i Do not leave the camera in an environment colder than 

0 °C (32°F) or warmer than 40 °C (104°F), as doing so 
may cause deterioration of the camera’s waterproof 
capability.

i Waterproof seals are used in this camera. It is 

recommended that the waterproof seals be replaced 
every year with new ones. For replacing the seals, 
please consult your dealer.
* Please note that there is a fee for replacing the 

waterproof seal.

k Other cautions

i Do not subject the camera to severe jolts, as doing so may deform the 

battery/card compartment cover or camera body, thus compromising its 
waterproof capability. If the camera has been subjected to a strong jolt, 
please consult with your dealer.

i “JIS IPX8” specifies that a device is protected against the effects of 

continuous immersion in water.