Sanyo xacti vpc-ca9gx ユーザーズマニュアル
31
English
TURNING THE CAMERA ON AND OFF
Turning off the camera
1
Press the ON/OFF button for at least 1 second.
h The camera turns off.
h To turn off the camera while it is in the recording mode or power save
h The camera turns off.
h To turn off the camera while it is in the recording mode or power save
mode, press the ON/OFF button for at least 1 second.
HINT
To immediately activate the power save function
To immediately activate the power save function
i Press the ON/OFF button briefly to activate the power save function.
About the standby mode
i To turn off the camera only briefly, you can close the monitor unit to put the
camera in the standby mode. The standby mode uses almost no power.
When the monitor unit is opened again, the camera turns on immediately
and you are ready to shoot or view images without any delay.
When the monitor unit is opened again, the camera turns on immediately
and you are ready to shoot or view images without any delay.
CAUTION
If the K icon appears...
If the K icon appears...
i When a picture is taken, the date and time it was captured are recorded
with it. If the date and time settings have not been completed (page 32),
the date and time cannot be recorded with the captured images. For this
reason, immediately after the camera is turned on, the “Set date and time”
screen appears. To have the date and time recorded with the images,
please complete this setting before capturing images.
the date and time cannot be recorded with the captured images. For this
reason, immediately after the camera is turned on, the “Set date and time”
screen appears. To have the date and time recorded with the images,
please complete this setting before capturing images.