Sharp MX-2300G ユーザーズマニュアル

ページ / 67
53
CLEANING THE MAIN CHARGER OF THE 
PHOTOCONDUCTIVE DRUM
If black lines or coloured lines appear even after you have cleaned the document glass and document feeder, use the 
charger cleaner to clean the main charger that charges the drum.
Figure 1
Figure 2
(1) Open the front cover.
(2) Release the waste toner box lock and let 
the waste toner box fall forward.
For the steps to follow when letting the waste toner box 
fall forward, see step 3 of "
(3) Slowly pull out the green knob (charger cleaner).
Pull out the knob as shown in Figure 2.
(4) Once the green knob (charger cleaner) is 
pulled out, slowly push it back in.
Push the knob as shown in Figure 2.
(5) Repeat steps (3) and (4) for each of the 
other charger cleaners.
There are a total of 4 places to be cleaned in the machine 
as shown in Figure 1.
(6) Push the waste toner box into the machine.
Push the waste toner box firmly in until it clicks into place.
(7) Close the front cover.
CLEANING THE BYPASS 
FEED ROLLER
If paper misfeeds frequently occur when feeding 
postcards, envelopes, or thick paper through the bypass 
tray, wipe the surface of the feed roller with a clean soft 
cloth moistened with water or a neutral detergent.
CLEANING THE 
ORIGINAL FEED ROLLER
If lines or other dirt appear on the scanned original when 
the automatic document feeder is used, wipe the surface 
of the roller with a clean soft cloth moistened with water 
or a neutral detergent.
Charger cleaner
Waste toner outlet
• If this does not solve the problem, pull the knob out and push it back in 2 more times.
• When pulling and pushing the knob to clean the charger, pull and push the knob slowly from one end to the other.
• Touching the waste toner outlet or the waste toner box may soil your hands and clothes. Exercise caution when cleaning 
the charger.