Alto-Shaam eco smart 750-th-iii ユーザーズマニュアル

ページ / 41
 
TH/III 
InsTallaTIon
/
operaTIon
/
servIce
 
manual
 
pg
. 19
O P E R A T I N G   I N S T R U C T I O N S
U S E R   O P T I O N S
P
REsET
 Keys Lock and Unlock
p
reset
 Keys A through H can be locked in order to  
prevent storing, altering or erasing a program.
To lock the P
reset
 Keys, press and hold the “I” 
Key until the oven beeps.  Release the “I” key.  The 
green indicator on the “I” key will illuminate.  Oven 
p
reset
 Keys A through H are now locked.
Note:   Only the oven p
reset
 keys A through H are 
affected by this lock-out in order to also allow 
the oven to be used with the unprogrammed 
Cook, Probe, or Hold modes.
To unlock the P
reset
 Keys, press and hold the  
c
aNcel
 Key along with the “I” Key for two seconds 
until the “I” key light no longer illuminates.  Release 
all keys.  The oven preset keys are now unlocked. 
Fahrenheit or Celsius Selection
 
With the control in the off mode,  
press and hold
 the u
p
 a
rrow
 Key until 
the display shows the current selection.  
Press the up or down buttons to toggle 
between the two options.  After each 
change the button must be released.  The 
display must clear before the procedure  
can be repeated.
 
Control Panel Lock and Unlock
The control panel can be locked at any time in order to 
prevent inadvertent or accidental setting changes.
To lock the control panel, press and hold the  
u
p
 a
rrow
 Key and then press the O
N
/O
ff
 Key.  
You will hear a brief beep and the panel lock  
indicator will illuminate.  Release all keys.   
The oven’s control panel is now locked.
Note:   The control panel is now fully locked with the 
exception of the O
N
/O
ff
 Key and a
rrow
 keys.   
You will be unable to turn the oven control off at 
this point.
To unlock the control panel, press and hold the d
owN
 
a
rrow
 Key and then press the O
N
/O
ff
 Key.  You 
will hear three beeps and the panel lock indicator will 
extinguish.  Release all keys.  The panel is now unlocked 
and ready for normal use.
 Beeper Volume Selection
With the control in the off mode, press 
and hold
 the d
owN
 a
rrow
 Key until 
the display shows one of the 4 volume 
levels (0 being 
off
 or the lowest, and  
3 being the highest).  After each change, 
the button must be released and the 
display must clear before the procedure can be 
repeated to select a different volume level.   
Turn the unit 
on
 and then 
off
 again to store the 
desired set point.
Preset
Lock
Lock
Indicator