Arkon sm221 ユーザーズマニュアル

Consumer Hotline: 
(USA)    (800) 841-0884
(INT'L)   (626) 254-9005
               Mon-Fri. 9am-5pm, PST

Arcadia, CA 91006 USA

Made in Taiwan

© Copyright 2007 Arkon Resources, Inc.

SM020

CM097

-Also available with dual T-head configuration

-Also available with dual T-head configuration

CM097

CM090

SM020-2

CM097-2

CM097-2

CM090-2

CM921

SM221

Step 1.

Step 2.

Step 3.

Insert the DC Power plug (A) completely into the vehicle's 
12V/lighter socket.

Adjust the angle of the pedestal arm by loosening/tightening 
the wing nuts (B) to the desired placement angle.

Attach your cradle or device to the pedestal by inserting the 
single T-tab (C) into the T-slot (D). Adjust the angle and rotation 
of the head by loosening/tightening the wing nuts (B). 

Installation Instructions  

Step 1.

Step 2.

Step 3.

If necessary, adjust the support legs (G) by sliding them 
laterally. These provide support for your device.

Place device on the support legs (G) and squeeze the side 
grip arms (E) until they fit securely to the device.

Push the release button (F) in order to release the device 
from the cradle.  

Do not install Arkon products over an air bag cover or within the air 
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and/or 
air bag deployment.

Arkon Resources, Inc. is not responsible for any damages caused to 
your car, your device, or yourself due to the installation or use of the 
pedestal mount.