Epson emp monitor operation v4.30 ユーザーズマニュアル
Troubleshooting
41
Troubleshooting
Projectors cannot be monitored or controlled
An e-mail message is not sent when a problem occurs
with a projector
with a projector
Cause
Remedy
Is the projector connected
to the network correctly?
to the network correctly?
Check that the network cable has been
connected correctly. If the cable is not
connected correctly, reconnect it.
connected correctly. If the cable is not
connected correctly, reconnect it.
Has the projector been set
up correctly for
connection to the
network?
up correctly for
connection to the
network?
Check the settings for the Network
configuration menu command.
configuration menu command.
s
Projector User's Guide
Has EMP Monitor been
installed on the computer
correctly?
installed on the computer
correctly?
Uninstall EMP Monitor and then re-install it.
s
s
Are all the projectors that
you want to control or
monitor registered?
you want to control or
monitor registered?
Register the projectors. s
Is the projector's Network
Monitoring or Standby
Mode configuration menu
set to ON or Network ON?
Monitoring or Standby
Mode configuration menu
set to ON or Network ON?
In order to use EMP Monitor to monitor and
control the projector when it is in standby
mode, the projector's Network Monitoring or
Standby Mode configuration menu must be
set to ON or Network ON.
control the projector when it is in standby
mode, the projector's Network Monitoring or
Standby Mode configuration menu must be
set to ON or Network ON.
s
Projector User's Guide
Cause
Remedy
Is the projector connected
to the network correctly?
to the network correctly?
Check that the network cable has been
connected correctly. If the cable is not
connected correctly, reconnect it.
connected correctly. If the cable is not
connected correctly, reconnect it.
Has the projector been set
up correctly for
connection to the
network?
up correctly for
connection to the
network?
Check the settings for the Network
configuration menu command.
configuration menu command.
s
Projector User's Guide
Have the SMTP server IP
address, port number and
recipient e-mail address all
been set correctly?
address, port number and
recipient e-mail address all
been set correctly?
Check the setting details.
Is the projector's Network
Monitoring or Standby
Mode configuration menu
set to ON or Network ON?
Monitoring or Standby
Mode configuration menu
set to ON or Network ON?
In order to use the mail notification function
when the projector is in standby mode, the
projector's Network Monitoring or Standby
Mode configuration menu must be set to ON
or Network ON.
when the projector is in standby mode, the
projector's Network Monitoring or Standby
Mode configuration menu must be set to ON
or Network ON.
s
Projector User's Guide
Has a critical problem
developed causing the
projector to momentarily
stop working?
developed causing the
projector to momentarily
stop working?
When the projector has momentarily stopped
working, it cannot send e-mail messages.
working, it cannot send e-mail messages.
If the projector cannot be reset even after it
has been checked, contact Epson.
has been checked, contact Epson.
s
Projector User's Guide
Is power being supplied to
the projector?
the projector?
Check if the power supply to the location
where the projector is set up has been
interrupted, or if the circuit breaker for the
electrical outlet that the projector is
connected to has been tripped.
where the projector is set up has been
interrupted, or if the circuit breaker for the
electrical outlet that the projector is
connected to has been tripped.