Shark gi477r ユーザーズマニュアル

Iron does not heat

Some odor or small 
particles come out of 
steam vents of new 
iron

Iron does not steam

Water droplets coming
from steam vents

• Iron should be plugged into a 120V AC electrical 

outlet only.  
Make sure that the plug is securely in the socket.

• Temperature setting too low.  

Select a higher fabric setting.

• This is normal.  

Follow instructions for first use and allow iron to steam 
through 2-3 fillings & press the steam burst button 
occasionally to eliminate small white particles.

• Water tank may be empty or water level is very low. 

Add water.

• Make sure that the fabric/temperature setting and 

the variable steam control are correctly set.  For
maximum steam,  (setting ‘Max’ on steam control),
temperature setting should be set on ‘•••’.

• Variable steam control dial is set on “0”.

Always allow the iron to reach the selected 

temperature with the variable steam control setting 

at ‘0’. Make sure the temperature setting is set in 
the correct steam area, e.g. ‘•’, and the steam control is 
not on ‘0’.  For more steam, set the fabric setting to a 
higher setting, e.g. ‘•••’, and the steam control to ‘Max’.

• If temperature setting and steam control setting are

correct and there is no steam, gently tap the 
soleplate on the ironing board a few times.  Move
the variable steam control from ‘0’ to ‘Max’ a few
times.

• Iron may not be hot enough.  Set temperature to the

‘Max’ position. Always allow iron sufficient time to
heat up before activating the variable steam control.

• Overuse of steam burst.  Allow more time between

each burst.

• Iron may have been overfilled.  Turn iron off,empty

water and follow  instructions for filling.

• Steam performance may be low if iron requires 

seasoning. To season, use regular tap water for 1or 2 
tanks until steam performance improves.

The odor is safe and should not reoccur 

after initial heating.

Also, before ironing with steam for the 

first time, allow iron to heat, hold in a 

horizontal position and hit the burst of 

steam button several times.  The iron 

may emit some small particles from the 

steam holes. This is normal and will 

clear after pressing the burst of steam 

button several times.

Before using your Retractor ™

Retractable Cord Iron, remove any 

labels, stickers or tags that may be 

attached to the body or soleplate of the 

iron.

When turned on for the first time, your 

new iron may emit an odor for up to 10 

minutes.  This is due to the initial 

heating of the materials used in making 

the iron. 

9.

Stainless Steel Soleplate

10. Cord Rewind Button
11. Handle
12. Auto-Shut-Off
13. Power On Light
14. Fabric Settings
15. Temperature & Steam 

Indicators

16. Water Flask

1. Electronic Temperature Control
2. Atomizer Spray Button
3. Burst of Steam
4. Variable Steam Control
5. Water Inlet Cover
6. Spray Nozzle
7. Water Level Window
8. Display Panel

Technical Specifications
Voltage:

120V, 60 Hz

Power:

1500 Watts