Pioneer VSX-AX4AVi-S ユーザーズマニュアル

 

En

 

/

 

If you selected 

 

, use 

 

/

 

 to switch speakers. The 

 

 setup will output test tones in the order shown on-

screen: 

Adjust the level of each speaker as the test tone is 

emitted.

 

1

 

You will return to the Manual SP Setup menu.

 

• You can change the channel levels at any time by 

pressing 

 

 then using 

 

/

 

 on the remote 

control.

 

For good sound depth and separation from your system, 
you need to specify the distance of your speakers from 
the listening position. The receiver can then add the 
proper delay needed for effective surround sound.

 

/

 

You can adjust the distance of each speaker in 0.1 meter 
increments.

 

You will return to the Manual SP Setup menu.

 

• For best surround sound, make sure the surround 

back speakers are the same distance from the 
listening position.

 

Some audio sources (for example, Dolby Digital and DTS) 
include ultra-low bass tones. Set the bass limiter as 
needed to prevent the bass from distorting the sound.

 

The current setting is displayed. When 

 

 is displayed 

the attenuator is off (bass output is not affected).

 

•

 

 – The volume is set to –60dB, a test 

tone plays back and you make the setting.

•

 

 – Clears any previous setting and 

switches limiting off.

 

/

 

1 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB 
SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

VSX_AX4AVi.book.fm 44 ページ ２００５年６月２０日　月曜日　午後６時２７分