HP Compaq KB-9965 311059-031 ユーザーズマニュアル

6.  Push the tab on the slot release lever (1). 

7.  Swing the lever back to unlock the expansion board (2). 

8.  Lift the expansion board from the slot (3). 

 

Reverse steps 1 through 8 to replace an expansion board. 

To remove the hot-plug expansion board basket: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

4.  Remove cables to all PCI-X Hot Plug expansion boards (slots 1 through 4). 

5.  Remove all PCI-X Hot Plug expansion boards from the basket. Refer to “PCI and PCI-X 

Hot Plug Expansion Boards” in this chapter.