pittsburgh-corning 2696 ユーザーズマニュアル

Page 4

Torque 

Wrenches

Retighten Lock Knob by turning it all 

7. 

the way clockwise.

8.  Set the Direction Switch for clockwise 

or counterclockwise operation.  The 

Switch shown above is in position for 

clockwise operation.
Place socket onto the nut or bolt and 

9. 

pull handle gradually until a click is 

heard or felt.  

that point; the click indicates that the 

torque setting has been reached.
Stop pulling and the Torque Wrench 

10. 

will automatically reset.
When finished, set the Torque to the 

11. 

lowest torque setting (not lower than 

the lowest setting) before storing 

indoors out of reach of children.

1. 

 inspect the 

general condition of the tool.  Check 

for loose hardware, misalignment or 

binding of moving parts, cracked or 

broken parts and any other condition 

that may affect its safe operation.
If the Torque Wrench has not been 

2. 

used for some time, turn the knurled 

handle (CW and CCW) several times 

to re-lubricate the internal workings. 

Then, operate at a low torque setting 

several times. This ensures proper 

operation. 

setting.
Wipe Torque Wrench with a cloth to 

3. 

clean. Do not immerse in any cleaning 

solution. This would damage the 

internal lubrication.
The Torque Wrench was calibrated 

4. 

and tested to ± 4%. Periodically have 

the Wrench calibrated and serviced 

by a qualified technician.
Store inside case in a clean and dry 

5. 

location.

  Replacement parts are not 

available for this item.