Precor move beyond 9.27 ユーザーズマニュアル

5. Press ENTER to accept the displayed setting.

The change will be retained in memory even if the 
treadmill is turned Off and unplugged.

6. If you want to exit without saving the change, press 

STOP.

The treadmill provides information about its use (odometer 
and hour meter), as well as the software version. In 
general, you would only access this information if directed 
to do so by Precor Customer Support.

These instructions guide you through the informational 
displays. Pressing the ENTER key resets the odometer 
and hour meter. To exit without resetting, press STOP at 
any time.

1. Remove the magnetic safety key.

2. Replace the magnetic safety key and within 2 seconds 

press the following keys:

STOP, INCLINE 

▲ and SPEED ▼

Note: If the keys are not pressed within the 2-second 
window, the banner appears and you must begin again. 

3. ODOMETER appears in the display. 

The software version appears in the center display. The 
odometer value (the cumulative miles or kilometers 
users have traveled) appears in the DISTANCE display. 
The furthest digit on the left marks the hundred-
thousandths position, while the furthest digit to the 
right indicates tenths of a mile or kilometer. 

The TIME display provides the hour meter (the number 
of hours the unit has been in use). If you have not used 
the treadmill for more than an hour, a zero will appear in 
the TIME display.

4. To exit without making changes, press STOP.

92x_Owners Manual.book  Page 38  Tuesday, April 22, 2008  8:18 AM