Polycom 400 ユーザーズマニュアル

VocalData Telephone Features

Polycom Telephone User Guide

You can also press the Remote button on the PressOne IP phone 
to deactivate the remote phone connection.

The remote phone feature can be activated via the Web Portal by 
selecting Options > Remote. You must check the box labeled 
“Enable Remote User”, then enter the phone number of the remote 
phone (for example, a cell phone or hotel phone number).

From the Web Portal, you can specify whether the call receiver’s 
Caller ID will display your remote phone number or PressOne 
desktop phone number. You can also set the number of seconds the 
phone will ring unanswered before the call is redirected to voice mail 
or other destination.  

The Web Portal will only show the Remote Phone enabled status if 
the remote phone was activated from the Web Portal. If the remote 
phone was enabled by dialing into the PressOne system from the 
remote phone, the active status will not be shown on the Web Portal 
display.

If you enable Remote Phone from the Web Portal, you can hang up 
the remote phone and the remote feature will still be active. The 
feature can only be disabled by unchecking the Enable Remote 
User field in the Web Portal or by pressing the Remote key on your 
PressOne 

phone.

Selective Call Forward allows you to program your phone to send 
calls from a list of telephone numbers to another telephone number. 
All calls from phones on the list go to the same destination, which 
can be changed at any time.