Pirelli discus dp-l10 ユーザーズマニュアル

132

No WiFi connection is available; check the wifi connection status in ‘Menu’ > 
‘WLAN’ > ‘WLAN status’. 

•

Not available
b

General WLAN connection error, e.g. the SSID does not exist.

„

Workaround: Check the WLAN configuration parameters in the 
WLAN profile (‘Menu’ > ‘WLAN’ > ‘WLAN settings’ > ‘Active Set-
tings’ and ‘Edit Active Setting’)

•

Time out
b

Association response exceeds timeout value, e.g. signal is weak, 
or Access Point is busy.

„

Workaround: retry the WiFi connection (press the right arrow in the 
scrolling keypad); eventually reduce the distance respect to the 
Access Point

•

Association refused
b

DP-L10 refused by Access Point during association phase, e.g. AP 
is resource-constrained.

„

Workaround: wait for some minutes, then retry the WiFi connection 
(press the right arrow in the scrolling keypad)

•

Authentication refused
b

Refused by AP during authentication phase, e.g. incorrect key, fil-
tered by AP’s ACL

„

Workaround: 

•

Check the encryption type on the DP-L10 (open, WEP, WPA-
PSK TKIP, WPA2-PSK AES) is according to the one on the 
Access Point. If you don’t know if the Access Point is using 
encryption, check on ‘Menu’ > ‘WLAN’ > ‘WLAN settings’ > 
‘edit act. Settings’ > ‘SSID security’ > ‘SSID’, ‘Site survey’ > 
‘SSID list’. Read the options of your SSID and check ‘Security’ 
field.

•

‘None’ no security is required. Set ‘open’ in ‘Menu’ > 
‘WLAN’ > ‘WLAN settings’ > ‘edit act. Settings’ > ‘SSID 
security’ > ‘Security’.

•

‘WEP’ > WEP key is required. Set ‘WEP’ in ‘Menu’ > 
‘WLAN’ > ‘WLAN settings’ > ‘edit act. Settings’ > ‘SSID 
security’ > ‘Security’. Then select ‘WEP key 1’ with your 
WEP key value.