HP 518870-B21 ユーザーズマニュアル
System Unit
System Unit
System Unit
System Unit
Dimensions
Dimensions
Dimensions
Dimensions
(H x W x D)
(H x W x D)
14.42 x 2.19 x 20.058 (36.63 x 2.19 x 50.95 cm)
Weight
Weight
Weight
Weight
(approximate)
(approximate)
Maximum
(all hard drives, DIMMs,
and processors installed)
(all hard drives, DIMMs,
and processors installed)
27 lbs (12.25 kg)
Minimum
(no hard drives, two
processors and four
DIMMs)
(no hard drives, two
processors and four
DIMMs)
19.2 lbs (8.71 kg)
Power Specifications
Power Specifications
Power Specifications
Power Specifications
For power specifications including input requirements, BTU rating, and
power supply output, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
power supply output, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
HP BladeSystem c7000 Enclosure QuickSpecs:
To review typical system power ratings use the HP BladeSystem Power Sizer
available at:
available at:
NOTE:
NOTE:
NOTE:
NOTE: For optimal cooling and system performance the BL685c G7
requires the c7000 enclosure to be configured with 10 fans and the c3000
enclosure to be configured with 6 fans.
requires the c7000 enclosure to be configured with 10 fans and the c3000
enclosure to be configured with 6 fans.
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
change is 20°C/hr (36°F/hr).
Relative Humidity
Relative Humidity
Relative Humidity
Relative Humidity
(non-condensing)
(non-condensing)
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
maximum wet bulb temperature, non-
condensing.
Non-operating
10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
(101.7°F) maximum wet bulb temperature, non-
condensing.
Altitude
Altitude
Altitude
Altitude
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
altitude change rate is 457 m/min (1500 ft/min).
QuickSpecs
HP ProLiant BL685c Generation 7 (G7) Server Blade
HP ProLiant BL685c Generation 7 (G7) Server Blade
HP ProLiant BL685c Generation 7 (G7) Server Blade
HP ProLiant BL685c Generation 7 (G7) Server Blade
Technical Specifications
DA - 13655 North America — Version 20 — November 14, 2011
Page 40