GTO pro light kit ユーザーズマニュアル
x2
DEL
AY
AY
TIME
R
0
60
1
1
8
9
10
11
14
12
13
15
2
2
3
3
4
4
5
5
6
6
7
7
GL
UE
16
1. Lens Hood (2)
2. 4 Watt Light Bulb (2)
3. Light Lens (2)
4. Light Socket & wires (2)
5. Top Mount Lens Support (2)
6. Face Mount Lens Support (2)
7. Mounting Plate (2)
8. Strain Relief Nut (1)
2. 4 Watt Light Bulb (2)
3. Light Lens (2)
4. Light Socket & wires (2)
5. Top Mount Lens Support (2)
6. Face Mount Lens Support (2)
7. Mounting Plate (2)
8. Strain Relief Nut (1)
9. Lens Hood Screws (4)
10. Wire Splicing Locks (4)
11. Wire Nuts (10)
12. Mounting Screws (8)
13. Wiring Plug (1)
14. Control Board (1)
15. Photocell (1)
16. Glue (1)
10. Wire Splicing Locks (4)
11. Wire Nuts (10)
12. Mounting Screws (8)
13. Wiring Plug (1)
14. Control Board (1)
15. Photocell (1)
16. Glue (1)
Parts Included:
Gate Opener
Light Kit
Gate Opener
Gate Opener
• Digital Controller: Controls lights to
conserve battery life. Built-in adjustable
time-on control, allows you to adjust the
light timer from 0-120 seconds.
time-on control, allows you to adjust the
light timer from 0-120 seconds.
• Easy Installation: Connects to existing
gate opener power system with no addi-
tional wiring or power source required.
tional wiring or power source required.
• Photocell: Only allows activation from
dusk-to-dawn for energy conservation
preventing lights from coming on when
not necessary.
preventing lights from coming on when
not necessary.
• Illuminates gate: Allows you to clearly
see the drive when gate is activated.
• Commercial lens: Professional land-
scape grade housing and lens are UV
resistant to prevent discoloration of the
lenses.
resistant to prevent discoloration of the
lenses.
• Decorative: Enhances the appearance of
your entrance and drive.
• Hardware: Post and column mount ap-
plication hardware included.
with Digital Controller
Face Mount
Post Mount
©2005 GTO, Inc.
rev - 04/07/05
IMPORTANT: 16 gauge, multi-stranded, direct burial, low voltage wire (RB509) is required to connect the
lights to the digital control board (see diagram on page 1). Small sections of the same wire will also be required
for connecting light kit control board to gate operator control board and power source. Please read manual to
determine how much wire you will need.
lights to the digital control board (see diagram on page 1). Small sections of the same wire will also be required
for connecting light kit control board to gate operator control board and power source. Please read manual to
determine how much wire you will need.