ICOM id-1 ユーザーズマニュアル

93

13

POCKET BEEP AND TONE/DIGITAL SQUELCH 

New2001

• Using the digital code squelch— in Digital voice mode
w Displays the Set Mode screen.
e Double click the “Digital Code” cell, then enter the desired

code number within 00 to 99.

r Click [DSQL] several times until “CBEEP” appears to turn

the pocket beep function ON.

t When a signal with matched digital code is received;

- The transceiver emits beep tones.
- Shows “CBEEP” and “

” indications alternately.

y Push [PTT] to answer.

• The pocket beep function is cancelled and the digital code

squelch operation is selected automatically.

• “CSQL” indication appears instead of “CBEEP.”
• When the called station call sign is not selected in “YOUR” (in

Select Call Sign screen), click [CD] to display Received Call
Record screen, select the call then click [Select] to set the call
sign before pushing [PTT].

u Click [DSQL] several times to cancel the digital code

squelch function.

• “CSQL” indication disappears.

• Using the call sign squelch— in Digital voice mode
w Click [CS] to display Select Call Sign screen.
e Select or enter the desired call sign in “MY.”

• After the setting, click [OK].

r Click [DSQL] several times until “DBEEP” appears to turn

the pocket beep function ON.

t When the signal with matched call sign is received;

- The transceiver emits beep tones.
- Shows “DBEEP” and “

” indications alternately.

y Push [PTT] to answer.

• The pocket beep function is cancelled and the call sign squelch

operation is selected automatically.

• “DSQL” indication appears instead of “DBEEP.”
• When the called station call sign is not selected in “YOUR” (in

Select Call Sign screen), click [CD] to display Received Call
Record screen, select the call then click [Select] to set the call
sign before pushing [PTT].

u Click [DSQL] several times to cancel the call sign squelch

function.

• “DSQL” indication disappears.

Select/enter the desired call sign.

Enter the desired
code number.

ID-1_ENG_2.qxd  04.9.22 9:30  Page 93 (1,1)