ICOM id-1 ユーザーズマニュアル
100
14
OTHER FUNCTIONS
13
14
■ Set mode
D
D Set mode operation with the application
q Select “Edit Set Mode(C)...” in View menu, click “ ” in tool
bar or press [F7] key on the PC keyboard.
• Set Mode screen appears.
• Set Mode screen appears.
w Double click the desired item, then select or enter the de-
sired value or condition.
e To close the Set Mode screen, click “ ” in tool bar, click
“
” or press [F7] key.
D
D Set mode operation with the RC-24
q Push [TXinh•
] for 0.5 sec.
w Push [MODE] or [TXinh•
] to select the desired item.
e Rotate [DIAL] to select the desired value or condition.
r To exit set mode, push [PWR] momentarily.
r To exit set mode, push [PWR] momentarily.
D
D Offset Freq.
(Offset Frequency)
Sets the duplex offset frequency within 0 to 60 MHz range.
During duplex (repeater) operation, transmit frequency shifts
the set frequency.
During duplex (repeater) operation, transmit frequency shifts
the set frequency.
(default value may differ depending on versions)
Offset Frequency
12.000
ID-1_ENG_2.qxd 04.9.22 9:30 Page 100 (1,1)