ICOM id-1 ユーザーズマニュアル
57
8
REPEATER OPERATION— VOICE
New2001
■ Accessing an FM repeater
D
D Setting from the application
q Click [MODE] to select FM mode.
• “FM” appears.
w Set the desired receive frequency
(repeater output frequency)
.
e Click [RP] several times to select minus or plus duplex.
• “RP–” or “RP+” appears.
• 12 MHz is set as the default for the USA version. Refer to page
• 12 MHz is set as the default for the USA version. Refer to page
60 for offset frequency setting.
r Click [TONE] to turn the repeater tone encoder ON.
• “TONE” appears.
• 88.5 Hz is set as the default. Refer to page 59 for tone frequency
• 88.5 Hz is set as the default. Refer to page 59 for tone frequency
setting.
NOTE for the USA version: During the auto repeater
function ON, the steps e and r are not necessary, de-
pending on the settings. See page 106 for the auto re-
peater function.
function ON, the steps e and r are not necessary, de-
pending on the settings. See page 106 for the auto re-
peater function.
t Push and hold [PTT] to transmit.
• The display frequency automatically changes to the transmit fre-
quency (repeater input frequency).
• If the repeater indicator, “RP–” or “RP+,” and “
” blink, con-
firm that the duplex direction and the offset frequency (p. 60) is
set correctly.
set correctly.
y Release [PTT] to receive.
u Click [MONI] to check whether the other station’s transmit
u Click [MONI] to check whether the other station’s transmit
signal can be received directly.
i To return to simplex operation, click [RP] several times to
clear the “RP–” or “RP+” indicator.
o To turn OFF the repeater tone encoder, click [TONE] sev-
eral times until no tone indicators appear.
Displays transmit frequency.
Indicates transmit output power level.
Appears during transmit.
Appear
Click
ID-1_ENG_2.qxd 04.9.22 9:29 Page 57 (1,1)