ICOM id-1 ユーザーズマニュアル

61

8

REPEATER OPERATION— VOICE

New2001

■ Accessing a Digital repeater

D

D Setting from the application

q Click [MODE] to select DV (Digital voice) mode.

• “DV” appears.

w Set the desired receive frequency 

(repeater output frequency)

.

e Click [RP] several times to select the repeater mode.

• Select “RP–” or “RP+.” 

r Click [CS] to display the Select Call Sign screen, then set

your call sign in “MY.”

• Click [Y]/[Z] to select the programmed your call sign.
• When your call sign is not programmed, enter your call sign into

the text box directly.

t Set the desired station call sign in “YOUR.” 

- Click [CQ] to displays “CQCQCQ” then click [OK].

- Click [Z] to select the call sign.

• When the desired call sign is not programmed, enter the de-

sired call sign into the text box directly.

y Set the desired near-by repeater call sign in “RPT1” then

click [OK].

• Click [Z] to select the call sign. 
• When the desired repeater call sign is not programmed, enter the

call sign into the text box directly.

• When linking repeaters via internet network (gateway connec-

tion), clicking [G] may be necessary depending on the repeater
system.

u Click “Enable” to display “

✔,” then set the near-by repeater

call sign from the desired station in “RPT2” then click [OK],
if necessary.

• Click [Z] to select the call sign. 
• When the desired repeater call sign is not programmed, enter the

call sign into the text box directly.

• When linking repeaters via internet network (gateway connec-

tion), clicking [G] may be necessary depending on the repeater
system.

Click if necessary. Click to shows “

✔” and select/enter the

desired repeater call sign, if desired.

Select/enter the desired call sign

; or click to display “CQCQCQ” for CQ call.

Click if necessary.

Appears

Click

ID-1_ENG_2.qxd  04.9.22 9:29  Page 61 (1,1)