ICOM id-1 ユーザーズマニュアル

ページ / 124
64
9
DATA OPERATION
8
9
■ General
The ID-1 allows you to not only for the voice communications
but also the data communications with Data mode.
The data communication functions as a wireless LAN unit
with up to 128 kbps (theoretical value) of data transmission
speed. Any data files can be copied to the connected PC.
Internet accessing* is also provided with Data mode opera-
tion when gateway connection is used.
*Contract with a gateway repeater manager is additionally required.
■ Precaution
WARNING! 
The saved file(s) in the shared folder may
be modified or deleted, or unknown file(s) may be copied into
the shared folder from the connected station when the trans-
mission inhibit is released.
Icom Inc. assume no responsibility whatsoever for any dam-
ages or lost profits resulting from opportunities for signal com-
munications being lost because of the failure, malfunction,
poor condition, damage, or data loss of this unit or because of
such external causes as power failure. Icom also dismisses
all responsibility for demands made by a third party.
The transmitting data may be received and decrypted by a
third party/station due to the ID-1 transmits data without en-
cryption.
Connect the ID-1 and PC via Ethernet cable for Data mode
operation in advance. (see p. 17) 
Disconnect the PC from any other network, another ISP, LAN,
etc., is recommended. Network error may be occurred.
For data transferring (PC-to-PC communication), a fixed IP
address must be assigned, the same workgroup setting and
have shared folder must be held for both PCs.
Make sure the Ethernet cable, as well as the coupler connec-
tions are secure. Loose connections may cause a data trans-
mission error during Data operation.
ID-1_ENG_2.qxd  04.9.22 9:29  Page 64 (1,1)