Philips ct1208-sxua10nz ユーザーズマニュアル
4
2
Then plug the transformer unit into an easily accessible AC power socket.
Bars moving ➨ battery is charging.
Bars steady ➨ battery is fully charged.
Bars moving ➨ battery is charging.
Bars steady ➨ battery is fully charged.
3
Depending on the network and condition of use, talk time goes from 1.40
to 4 hours and standby time from 8 to 15 days.
to 4 hours and standby time from 8 to 15 days.
L
The only way to turn off the charger is to unplug it, so use an easily accessible
AC power socket. Keeping the mobile plugged to the charger when the battery is
fully charged does not damage the phone.
AC power socket. Keeping the mobile plugged to the charger when the battery is
fully charged does not damage the phone.
Customising your phone
You can customise your mobile phone by removing the front cover and the
battery door, and replace them with different ones.
battery door, and replace them with different ones.
L
You must always remove the battery when customising your phone.
1
Press on the top of the battery cover, then push the cover
to remove it.
to remove it.
L
Make sure the phone is switched off before removing the cover.
2
Remove the battery by both lifting the bottom clip and the
battery upwards (1), and pushing it downwards (2).
battery upwards (1), and pushing it downwards (2).
Fisio120_GB_4311 255 51322.book Page 4 Vendredi, 24. mai 2002 3:54 15