Philips ct5688-000000eu ユーザーズマニュアル
Settings
25
select in the list (then press
R
Edit
to access the
various fields), or to a new profile that you create
(select
(select
<Empty>
, then also press
R
Edit
).
Options described below are operator and/or
subscription dependent. Error messages during
connection are mainly due to incorrect parameters:
contact your operator before first use, in order to have
the appropriate settings, which you might receive via
SMS in some cases. Some pre-configured profiles may
be locked, preventing re-programming and renaming.
subscription dependent. Error messages during
connection are mainly due to incorrect parameters:
contact your operator before first use, in order to have
the appropriate settings, which you might receive via
SMS in some cases. Some pre-configured profiles may
be locked, preventing re-programming and renaming.
The available
CSD settings
are:
The
GPRS settings
are the same as for the CSD
settings, except for the following:
Transfer rate
Allows you to select the data transfer rate that will be
applied, whether over the air or via a serial cable:
applied, whether over the air or via a serial cable:
19.2 Kb/s
,
38.4 Kb/s
,
57.6 Kb/s
, or
115.2 Kb/s
.
Transfer rates might also depend on line conditions.
Codes
If you enter an incorrect PIN2 code 3 times, your SIM
card is blocked. To unblock it, request the PUK2 code
from your operator or retailer. If you enter an
incorrect PUK code 10 times in a row, the SIM card
will be blocked and unusable. If this happens, contact
your operator or retailer.
card is blocked. To unblock it, request the PUK2 code
from your operator or retailer. If you enter an
incorrect PUK code 10 times in a row, the SIM card
will be blocked and unusable. If this happens, contact
your operator or retailer.
Profile name
To name the profile such as it
will appear in the list.
will appear in the list.
Connect type
ISDN
or
Analog
, according to
your subscription.
Dial number
Needed to establish the
connection and provided to you
by your operator.
connection and provided to you
by your operator.
User name
Login used for connection.
Password
Password used for connection.
DNS
IP address of the server the
phone will connect to.
phone will connect to.
GPRS APN
Address of the external data
network you want to connect to
(text string).
network you want to connect to
(text string).
Authentication
Allows you to
Activate
or
Deactivate
the network
authentication.
Security
Philips568_GB_4311 255 60731.book Page 25 Mardi, 5. octobre 2004 3:24 15