Philips ct5688-000000eu ユーザーズマニュアル
Getting started
3
the phone on one end, then plug it into a main
AC power socket.
AC power socket.
2.
The battery symbol indicates the state of charge:
- during charging, the 3 charge indicators scroll;
- during charging, the 3 charge indicators scroll;
it takes around 2.5 hours to fully recharge your
mobile phone.
mobile phone.
- when all 3 bars are steady the battery is fully
charged: disconnect the charger. Depending
on the network and condition of use, talk time
goes up to 4 hrs and stand-by time up to
300 hrs.
on the network and condition of use, talk time
goes up to 4 hrs and stand-by time up to
300 hrs.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn’t damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
battery is fully charged doesn’t damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
Philips568_GB_4311 255 60731.book Page 3 Mardi, 5. octobre 2004 3:24 15