Philips dvd701-931 ユーザーズマニュアル

You can switch the NTSC/PAL setting of the DVD player to match the video
signal of your TV. This setting only affects the television’s on-screen display
that shows the stop and setup modes. You may select either NTSC or PAL. To
change the DVD player setting to PAL or NTSC, follow the steps below.

Unplug the DVD player from the mains.

Press and hold 

9 and T on the front of the DVD player. While holding

9 and T plug in the mains.

After PAL or NTSC appears on the display panel of the DVD player,
release 

9 and T at the same time. The PAL or NTSC that appears on

the display panel indicates the current setting.

To change the setting, press 

T within three seconds. The new setting

(PAL or NTSC) will appear on the display panel.

This manual gives the basic instructions for operating this DVD player. Some
DVDs require specific operation or allow only limited operation during
playback. In these cases, the player may not respond to all operating
commands. When this occurs, please refer to the instructions contained with
the DVD.  When the symbol Ä appears on the TV screen, the operation is
not permitted by the player or the disc.

- Unless otherwise stated, all operations can be carried out with the remote

control. Always point the remote control directly at the player, making sure
there are no obstructions in the path of the infrared beam.
When there are corresponding keys on the front panel of the player, they
can also be used.

- A number of operations can be carried out via the menu bar on the screen.

The menu bar can be accessed by pressing any of the following keys on the
remote control: MENU OSD, T-C, Angle, Audio Language, Subtitle Language
and Zoom.

- The following functions are available via the menu bar:

- V

Personal Preferences

- W

Title/Track

- X

Chapter/Index

- Y

Audio language

- Z

Subtitle language

- }

Angle

- a

Zoom

- c

Video Program

- d

Sound

- e

Picture by Picture

- f

Slow motion

- g

Fast motion

- h

Time search

PREPARATION