Philips dvd714 ユーザーズマニュアル
11
Preparation
General Notes
¶ Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
player. Use only one of the connections described below.
¶ Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best
connections.
connections.
¶ For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
optional equipment.’
stereo or audio/video equipment. See ‘Connecting to
optional equipment.’
Caution:
–
–
Make sure the DVD Player is connected
directly to the TV. Set the TV to the correct video
input channel.
–
input channel.
–
Do not connect the DVD Player’s audio out
jacks to the phono in jack of your audio system.
–
–
Do not connect your DVD Player via your
VCR. The DVD image could be distorted by the
copy protection system.
copy protection system.
Connecting to a TV
¶ Make one of the following connections, depending on the
capabilities of your existing equipment.
¶ When using the COMPONENT VIDEO OUT jacks, set the
VIDEO OUTPUT switch to COMPONENT. When using
the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to
S-VIDEO.
the S-VIDEO OUT jack, set the VIDEO OUTPUT switch to
S-VIDEO.
Component Video (P
B
/C
B
P
R
/C
R
Y)
connection
1
Connect the P
B
/C
B
P
R
/C
R
Y COMPONENT VIDEO OUT
jacks on the DVD Player to the corresponding in jacks on
the TV using an optional P
the TV using an optional P
B
/C
B
P
R
/C
R
Y cable
(Z).
2
Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
S-Video (Y/C) connection
1
Connect the S-VIDEO OUT jack on the DVD Player to the
S-Video in jack on the TV using an optional S-Video cable
(Y).
S-Video in jack on the TV using an optional S-Video cable
(Y).
2
Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
Video (CVBS) connection
1
Connect the VIDEO OUT jack on the DVD Player to the
video in jack on the TV using the video cable supplied
video in jack on the TV using the video cable supplied
(X).
2
Connect the Left and Right AUDIO OUT jacks (1 or 2) of
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
the DVD Player to the audio left/right in jacks on the TV
(A) using the supplied audio cables.
TV
Y
X
A
Z
P
REPARATION