Philips dvdr3380 ユーザーズマニュアル

ページ / 63
English
16
TIPS:  Before making or changing any connections, make sure that all the devices are disconnected 
from the power outlet.
Step 2: Optional Connections
 (continued)
A
B
Back of a VCR 
(Example only)
Connecting to a VCR or 
other similar device
This connection enables you to record
from video tape to a DVD±R/±RW and
allows the VCR to be used for playback if
the recorder is turned off.
IMPORTANT!
Your new recorder can replace the
VCR for all your recording needs.
Just unplug all the connections to 
your VCR.
A
 Connect the Antenna/Cable TV signal to  
the ANTENNA-IN 
 jack on the 
recorder.
B
 Use a RF coaxial cable to connect the 
TV-OUT 
 jack on the recorder to 
the antenna input jack on your TV (VHF/
UHF RF IN).
C
 Use the audio/video cables to connect 
the VIDEO /AUDIO INPUT (red/
white/yellow) on the recorder to the 
matching VIDEO/AUDIO output jacks on 
the VCR.
D
 Use the audio/video cables to connect 
the VIDEO/AUDIO OUTPUT (red/
white/yellow) on the recorder to the 
matching VIDEO/AUDIO input jacks on 
the TV.
Helpful Hints:
–  Most commercial video cassettes and
DVDs are copy-protected and therefore
cannot be recorded.
–  Connect the recorder directly to the
TV. If there is a VCR or an additional device 
in between, the picture quality may be poor
because of the copy protection system built
into the recorder.
 
 
VIDEO 
IN 
OUT
IN
AUDIO
L
AUDIO
R
 
 
VIDEO 
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
AU D IO
O U T
S-V ID E O
IN
V ID E O   IN
TV
   
    
  
   
   
    
  
    
CABLE
SATELLITE
ANTENNA
D
C
A